Search

Adkins Alpha Industrial Pneumatic Heat Press (100cm x 120cm)

RRP FROM £6,695.00


Picture of Adkins Alpha Industrial Pneumatic Heat Press (100cm x 120cm)

Adkins Alpha Industrial Pneumatic Heat Press (100cm x 120cm)

RRP FROM £6,695.00

The Alpha Industrial Pneumatic Transfer Press is a pneumatically operated heat press for transfer printing and material fusing and comes supplied with either a single or double table configuration making it ideal for high volume production with low operator fatigue.

Available with options for either single or double table configuration, the Adkins Industrial Pneumatic heat press can be used for printing garment panels and similar larger items. This robust machine is powered by a micro-processor for control of both heat and dwell accuracy and ease of operation and requires minimal operating space. The Alpha Industrial Pneumatic Press also features either an automatic or manual table operation and benefits from an automatic release system at the end of the pressing cycle.

SKU: XP7061
Manufacturer: Adkins

Key Features

This fully featured, pneumatically operated press boasts an impressive range of features including:

- PCB control system.

- Cartridge based, replaceable heating elements.

- Manual or automatic operating modes with auto open release system.

- Heat plate will not operate until directly aligned over the lower table.

- Fully adjustable temperature and pressure control.

- Electronic countdown timer.

- Emergency stop button that shuts off machine operation.

- Inbuilt thermal cut out on the heating element shuts off power to heating element should the temperature exceed 235°C +/- 15°C (455°F +/-27°F).

Large Single Table Pressing Area

The large single table pressing area measuring 100 cm x 120 cm, with a sliding lower table. Ideally suited for printing larger garment panels such as Sportswear, Flags, Upholstery Materials and Soft/ Hard signage applications.

Easily Replicate Exact Pressure

The pneumatic operation means that you can easily replicate exact pressure with every press cycle and operator fatigue is kept to a minimum, resulting in improved operator output and reducing mistakes due to fatigue.

Innovative Cartridge Based Heating Element

The Alpha Industrial Flatbed Series 5 range has an innovative cartridge based heating element that replaces the older single continuous cast in aluminium style element. The benefit of the cartridge system is that it has multiple, individually replaceable elements, allowing replacement of just a single cartridge should the need arise.

Fully Adjustable Air Pressure Gauge

The operator controls the pressure via a simple, fully adjustable air pressure gauge and locking air pressure control. Fully adjustable time and temperature are set via the controller and the LED display features a countdown timer.

Compliance

Manufactured and tested to comply with EC safety regulations. CE labelled.

Multiuse

Ideal for use with flex, flock, laser, sublimation, bonding, laminating, reactivation and DTG.

LED Digital Microprocessor

The Industrial Flatbed Series 5 Press is controlled by a Digital Microprocessor that ensures accuracy in temperature and dwell time.

Sliding Lower Table

The operator loads the machine via the sliding lower table. This allows the operator to have a perfect view of the transfer area for accurate and easy loading and application.

Pneumatic Operation

The Alpha Industrial Flatbed Series 7 Press is pneumatically operated which allows it to achieve a maximum of 6 bar. pressure. This makes it ideal for all forms of pressing work even in the most demanding high pressure environments. The pneumatic operation drastically reduces operator fatigue.

Available with options for either single or double table configuration, the Adkins Industrial Pneumatic heat press can be used for printing garment panels and similar larger items. This robust machine is powered by a micro-processor for control of both heat and dwell accuracy and ease of operation and requires minimal operating space. The Alpha Industrial Pneumatic Press also features either an automatic or manual table operation and benefits from an automatic release system at the end of the pressing cycle.

Working Area (W x H x D): 170.1 x 152.2 x 229.3 cm
Weight: Gross 764 Kg / Net 536 Kg
Power Requirements: 230 Volts AC / 64 Amps
Fuse: 34 Amps
Heat Element: Cartridge Elements (x6) - Replaceable
Table Size (L x W): 100 cm x 120 cm
Maximum compressed air supply: 6 bar. max. (87 psi. max)
Suggested compressed air supply: 5 bar. (65 psi)
Compressed air consumption: 40 litres/min (1.41 cu. ft./min) @ 5 bar.
Frame Material: Steel
Control Unit: PCB Control
Working Temperature: 70 - 225°C
Display Timer Range: 0 - 480 sec
Warranty: 12 months (machine and heating element)
Products specifications

Finance

 

Finance options are available for the loading.... These may vary on a case by case basis and should be discussed with a member of the Xpres Plus team.

 

 

 

 

Xpres Plus are not the lender, but are acting on the customers behalf to arrange contact between our finance partners.