Diferro Roll to Roll Transfer Printing Machine DM Series

RRP FROM £30,995.00

Diferro Roll to Roll Transfer Printing Machine DM Series

RRP FROM £30,995.00

Diferro's latest “DM” Series has evolved and now includes many unique new features. Diferro have created a truly cost effective machine that is not only built to last, but also offers multiple configuration choices and the performance required for an efficient highspeed print finishing experience. Although it is mainly used for textile transfer printing, it can also be used for other heat transfer operations.

SKU: DM-SERIES

Manufacturer: Diferro

Overview
Models
Technical
Specifications
Downloads
Finance
Enquire

Machine	Drum Diameter		Drum Width		Maximum Working Width	Working Data			Maximum Current Input	Total Power	Avarage Energy Consumption	Drum Resistance Power	Drum Engine Power	Dimensions (Footprint with Table)	Net Weight	Dimensions of the Shipping Crate
DM SERIES
Code	mm	inch	mm	inch	mm	m/min	m/hour	m2/hour	Amp.	Kw	Kw	Kw	Kw	Cm	Kg	Cm	Kg
DM-20B600C	600	23.6″	2000	78.7″	1900	4.34	260.4	521	115,79	44	28,6	41,5	1,5	315x200x155	3050	340x225x190	3355
DM-22B600C			2200	85.6″	2100	4.34	260.4	573	118,42	45	29,25	43	1,5	335x200x155	3350	360x225x190	3685
DM-26B600C			2600	102.3″	2500	4.34	260.4	677	173,68	66	42,9	63	2,2	375x200x155	3830	400x225x190	4213
DM-33B600C			3300	129.9″	3200	4.34	260.4	859	226,32	86	55,9	83	2,2	445x200x155	4950	470x225x190	5445
DM-20B800C	800	31.5″	2000	78.7″	1900	5.40	324	648	134,21	51	33,15	48	2,2	315x200x170	3700	340x225x205	4070
DM-22B800C			2200	85.6″	2100	5.40	324	713	147,37	56	36,4	53	2,2	335x200x170	4050	360x225x205	4455
DM-26B800C			2600	102.3″	2500	5.40	324	842	186,84	71	46,15	68	2,2	375x200x170	4770	400x225x205	5247
DM-33B800C			3300	129.9″	3200	5.40	324	1069	231,58	88	57,2	83	4	445x200x170	6000	470x225x205	6600
DM-20B1000C	1000	39.4″	2000	78.7″	1900	6.50	390	780	186,84	71	46,15	68	2,2	315x200x185	4350	340x225x225	4785
DM-22B1000C			2200	85.6″	2100	6.50	390	858	205,26	78	50,7	75	2,2	335x200x185	4780	360x225x225	5258
DM-26B1000C			2600	102.3″	2500	6.50	390	1014	250,00	95	61,75	90	2,2	375x200x185	5600	400x225x225	6160
DM-33B1000C			3300	129.9″	3200	6.50	390	1287	318,42	121	78,65	116	4	445x200x185	7050	470x225x225	7755

Heating System	Heat Transfer Oil
Max.Temperature	220c°
Average Heating Time	60 – 80 min
Average Cooling Time	150 min.
Power Supply	380 V – 3 Ph 50/60 Hz
Air Intake (bar)	Min. 5 – Max. 8
Electrical System	PLC Control
Felt Tension System	Pneumatic
Felt Control System	Automatic
Drive Speed Control	AC Inverter
Paper Un-wind Re-wind	Compressed Shaft
Weekly Programming	Yes
Automatic Shut-Down	Yes
Safety	4 Emergency Buttons – Safety Wire
Software Language	English (Optional)
Warranty	2 years Mechanical, 1 year Electrical (User Fault Exempted)

Products specifications

Applications	Textiles

Downloads

DM Series Catalog

Finance

Finance options are available for the loading.... These may vary on a case by case basis and should be discussed with a member of the Xpres Plus team.

Xpres Plus are not the lender, but are acting on the customers behalf to arrange contact between our finance partners.

Operation Types

- Digital Paper Rolls to Rolls of Fabric

Other Scopes Of Use

- Film Lamination

- Foil Printing

The Drum

The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage.

The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.

The Felt Belt

All of our machines are equipped with 100% Nomex seamless industrial felt belts that are reinforced with Kevlar material in order to avoid stretching. The expected lifetime for the belt on this unit is between 3 & 5 years depending on use. In order to eliminate movement of the felt belt to either side the machine is built with an automated-felt centering mechanism. The felt tension and the felt centering system are both air-operated (Pneumatic). Should the compressor fail to supply the required air for the system, the machine halts and alerts the operator to prevent lasting damage to the belt.