Swift-Jet provides an on-demand application process for digital print preparation, with rapid start and stop. Following surface cleaning, the machine uses a patented high-pressure spray technology to apply a consistent application of pre-treatment chemistry to PFP fabric. It then undertakes a drying process using its unique, patented, scanning drying technology before presenting the fabric for printing. All processes are contactless with full digital control for exacting results and optimum performance.
In-line or stand-alone process, reactive or pigment, the results speak for themselves
It can be used as a stand-along machine for pre-coating reel-to-reel or inline directly with a digital print machine. The mechanical and software design ensures consistent performance at variable process speeds to match today’s industry standards for digital print processes.
Reactive print results below. These are real time, real life results achieved using Swift-Jet in factory conditions.
Start saving on processing costs from Day 1
Swift-Jet offers matchless process savings, with significant reductions in water, energy and chemical consumption. The typical payback period is under 2 years with savings on processing costs from Day 1.
The potential annual savings when operating Swift-Jet compared to conventional textile process methods:
Water saving: 65 tons, Equivalent energy savings: +700,000 KWH, Chemicals savings: 7 tons, Calculation based on 1 million m²/annum
"Swift-Jet is an innovation which allows us to provide rapid response and short runs for our customers, whilst saving process costs in both chemicals and energy; and our customers get to market quicker"
Ultra streamlined efficiency
Why follow convention when there is a better way?
Swift-Jet ‘s ultra-streamlined efficiency enables rapid response and short run efficiencies
Traditional pre-coating technics are mismatched with today’s digital printing technology. Swift-Jet is tomorrow’s technology, while being a proven and tested system. This is the future for textile digital printing.
Repeatable premium results
Swiftjet uses a unique high pressure spray application method that controls the droplet size down to a micron level, this allows for a precise and controlled application rate.
It provides just the exact amount of pre-coating penetration through pressure and flow control, then with the Infrared drying combination is able to immediately present fabric to the printing system on demand to suit the optimum requirements.
Every single variable and parameter can be recorded and preset to ensure optimum fine tuning, performance and repeatability.
Best results every time – efficiently achieved.